Low-Rise Apartment Occupancy

Height: < 15m

Area: < 500 sqm

Residential Occupancy Containing Three or More Dwelling Units With Independent Bathroom and Cooking Facilities

V	INTERIOR FINISH CONTENTS AND FURNISHING		LOW-RISE APARTMENT
A	INTERIOR FINISH	COMPLYING WITH CHAPTER 10 OF NFPA 101	REQUIRED
1	INTERIOR WALL & CEILING FINISHES	EXIT ENCLOSURES	CLASS A
		LOBBIES & CORRIDORS	CLASS A OR CLASS B
		OTHER SPACES	CLASS A, CLASS B OR CLASS C
2	INTERIOR FLOOR FINISHES	EXIT ENCLOSURES, EXIT ACCESS CORRIDORS AND SPACES NOT SEPARATED FROM THEM	CLASS II

Notes:
*This Fire Safety Guide is prepared to determine the minimum required Fire Safety provisions for each Occupancy Type as referenced from General Directorate of Civil Defence (GDCD) adopted National Fire Protection Association (NFPA) Codes & Standards.

For further guidance, the user is referred to the NFPA Codes and Standards and the General Fire Safety Requirements - Guidelines Annexes.

** Occupancy Classification: Unless both the height and area requirements or criteria are met, the next higher classification or category SHALL apply.

FRR*-FIRE RESISTANCE RATING, FPR**-FIRE PROTECTION RATING, ASS-AUTOMATIC SPRINKLER SYSTEM / AUTOMATIC SUPPRESSION SYSTEM, SS-SMOKE-STOP LOBBY, FF-FIRE FIGHTING LOBBY, NP-NOT PERMITTED, N/A-NOT APPLICABLE, R-REQUIRED, NR-NOT REQUIRED

All the information(s) in this website are intended as a personal reference or notes only, we shall not be responsible for any loss, damage or injury that may be suffered by anyone in connection with the use of the facilities designed based on the recommendation of this website.