High Hazardl Industrial Occupancy

IN ACCORDANCE WITH NFPA 5000 CHAPTER 7 TABLE 7.4.1 FOR THE ALLOWABLE BUILDING HEIGHT AND AREA REQUIREMENTS

V	INTERIOR FINISH CONTENTS AND FURNISHING		HIGH HAZARD INDUSTRIAL BUILDINGS
A	INTERIOR FINISH	COMPLYING WITH CHAPTER 10 OF NFPA 101	REQUIRED
1	INTERIOR WALL & CEILING FINISHES	CLASS A/B/C IN OPERATING AREAS & EXIT ENCLOSURES	REQUIRED
2	INTERIOR FLOOR FINISHES	CLASS II IN EXIT ENCLOSURE & EXIT ACCESS CORRIDORS	REQUIRED
2	INTERIOR FLOOR FINISHES	OTHER AREAS	NOT REQUIRED

Notes:
*This Fire Safety Guide is prepared to determine the minimum required Fire Safety provisions for each Occupancy Type as referenced from General Directorate of Civil Defence (GDCD) adopted National Fire Protection Association (NFPA) Codes & Standards.

For further guidance, the user is referred to the NFPA Codes and Standards and the General Fire Safety Requirements - Guidelines Annexes.

** Occupancy Classification: Unless both the height and area requirements or criteria are met, the next higher classification or category SHALL apply.

FRR*-FIRE RESISTANCE RATING, FPR**-FIRE PROTECTION RATING, ASS-AUTOMATIC SPRINKLER SYSTEM / AUTOMATIC SUPPRESSION SYSTEM, SS-SMOKE-STOP LOBBY, FF-FIRE FIGHTING LOBBY, NP-NOT PERMITTED, N/A-NOT APPLICABLE, R-REQUIRED, NR-NOT REQUIRED

All the information(s) in this website are intended as a personal reference or notes only, we shall not be responsible for any loss, damage or injury that may be suffered by anyone in connection with the use of the facilities designed based on the recommendation of this website.